F-Series Model F-50 Part No. 10000 For up to 7” diameter wheel Easily coupled with our Wheel Guard Mounting, G Micrometer Base and fixture for Under The Wheel Dressing. Adaptable to tool and cutter grinders. Model RFG-50 Part No. 10100 Model F-50 (above) mounted on our G Micrometer base. Model F-55 Part No. 10001 For up to 8” diameter wheel Easily coupled with our Wheel Guard Mounting, G Micrometer Base and fixture for Under The Wheel Dressing. Adaptable to tool and cutter grinders. Dresser mounted on our micrometer base Our G Micrometer base

Model RFG-55 Part No. 10101 Model F-55 (above) mounted on our G Micrometer base. Model F-618 Part No. 10002 F or up to 12” diameter wheel Easily coupled with our G Micrometer Base and fixture for Under The Wheel Dressing. Model RFG-618 Part No. 10102 Model F-618 (above) mounted on our G Micrometer base. Wheel Dresser for: Cylindrical, Universal and Surface Grinders Model F-750A Part No. 10004 For up to 14” diameter wheel This model has an adjustable height of 4” to 7 1/2” above the table with (2) holder for diamonds. Dresser has been designed primarily for use on cylindrical and universal grinders. Units are adapted with a Solid Angle Ramp. Will dress both external and internal wheels. Units are provided with a shock arrester which eliminates vibration when the diamond is extended to maximum position on 14” diameter whee . Also used on surface, tool and cutter grinders. Easily coupled with our G Micrometer Base and fixture for Under The Wheel Dressing. For radius and angle capacities, refer to Fluidmotion Wheel Dresser Specifications Chart. Model RFG-750A Part No. 10104 Model F-750A (above) mounted on our G Micrometer base. Note: Modified base may be required to adapt wheel dressers to grinders. Consult factory for recommendations or see Adapters and Attachments. Micrometer Base Hardened and ground base with controlled fine diamond infeed. Feed is independent of table movement having 13/16” travel. Especially recommended for dressing small radii.