E-Series Model E-75 Part No. 10200 For up to 12” diameter wheel Easily coupled with our fixture for Under The Wheel Dressing and our C Micrometer base. Adaptable to tool and cutter grinders. Model REC-75 Part No. 10300 Model E-75 (above) mounted on our C Micrometer base. Model E-85 Part No. 10201 For up to 14” diameter wheel Easily coupled with our fixture for Under The Wheel Dressing and our C Micrometer base. Model REC-85 Part No. 10301 Model E-85 (above) mounted on our C Micrometer base. Dresser mounted on our micrometer base Our C Micrometer base

Model E-95 Part No. 10202 F or up to 20” diameter wheel asily coupled with our fixture for Under The Wheel Dressing and our C Micrometer base. Model REC-95 Part No. 10302 Model E-95 (above) mounted on our C Micrometer base. Wheel Dresser for: Cylindrical, Universal and Surface Grinders Model H-24A Part No. 10203 For up to 24” diameter wheel This model has an adjustable height of 6” to 10” above the table with two (2) holders for diamonds. Dresser has been designed primarily for use on cylindrical and universal grinders. Units are adapted with a Solid Angle Ramp. Will dress both external and internal wheels. Unit is provided with a shock arrester which eliminates vibration when diamond is extended at maximum position on 24” diameter wheels. Easily inserted on a C Micrometer Base and fixture for Under The Wheel Dressing. Model RHC-24A Part No. 10303 Model H-24A (above) mounted on our C Micrometer base. Model H-30A Part No. 10204 For up to 30” diameter wheel Has an adjustable height of 6” to 11 3/8” above the table with two (2) holders for diamonds. Dresser has been designed primarily for use on cylindrical grinders. Units are adapted with a Solid Angle Ramp. Will dress both external and internal wheels. Unit is provided with a shock arrester which eliminates vibration when diamond is extend at maximum position on 30” diameters wheels. Model RHC-30A Part No. 10304 Model H-30A (above) mounted on our C Micrometer base. Note: For wheel diameters from above 30” up to 36” consult factory for recommendations. Model RHS-36 Part No. 10305 For up to 42” diameter wheel This unit has an adjustable height of 15” to 20” above the table with two (2) holders for diamonds. Dresser has been designed primarily for use on roll grinders. For Radius and angle capacities, refer to page 19 Fluidmotion Wheel Dresser Specifications Chart. Note: Modified base required to adapt wheel dressers to grinding machines. Consult factory for recommendations or see Adapters and Attachments. Micrometer Base Hardened and ground base with controlled fine diamond infeed. Feed is independent of table movement having 1 3/16” travel. Especially recommended for dressing small radii.