Model RFG-55
Part No. 10101
Model F-55 (above) mounted on our G Micrometer base.
Model F-618
Part No. 10002
F or up to 12” diameter wheel
Easily coupled with our G Micrometer Base and fixture for Under The Wheel Dressing.
Model RFG-618
Part No. 10102
Model F-618 (above) mounted on our G Micrometer base.
Wheel Dresser for: Cylindrical, Universal and Surface Grinders
Model F-750A
Part No. 10004
For up to 14” diameter wheel
This model has an adjustable height of 4” to 7 1/2” above the table with (2) holder for diamonds. Dresser has been designed primarily for use on cylindrical and universal grinders. Units are adapted with a Solid Angle Ramp. Will dress both external and internal wheels. Units are provided with a shock arrester which eliminates vibration when the diamond is extended to maximum position on 14” diameter whee . Also used on surface, tool and cutter grinders. Easily coupled with our G Micrometer Base and fixture for Under The Wheel Dressing. For radius and angle capacities, refer to Fluidmotion Wheel Dresser Specifications Chart.
Model RFG-750A
Part No. 10104
Model F-750A (above) mounted on our G Micrometer base.
Note: Modified base may be required to adapt wheel dressers to grinders. Consult factory for recommendations or see Adapters and Attachments.
Micrometer Base
Hardened and ground base with controlled fine diamond infeed. Feed is independent of table movement having 13/16” travel. Especially recommended for dressing small radii. |